Sinergystik
100ml, 250ml, 500ml, 1L, 5L, 10L, 20L, 200L, 1000L
SINERGYSTIK is a multifunction formulation based on Alkyl polyglycol ether whose physical- chemical properties improve the quality of the culture medium by eliminating the foam generated by some mixtures, cohesive action and homogenization of the mixtures, which facilitates handling and offers greater effectiveness in the fight against pests and crop diseases, with special characteristics that allow it to interact with the lipophilic characteristics of the leaf cuticle and the lipophilic or hydrophilic characteristics of the agrochemical in use, facilitating the reduction of the surface tension of the areas in contact (drop of the solution and plant tissue) improving the coverage of the sprayed area, facilitating the penetration and absorption of the product into the plant tissue.
The different functions of SINERGYSTIK aimed at facilitating work in the field and optimizing phytosanitary and plant nutrition treatments could be summarized as:
Wetting action: improves the adhesion of the mixture on the leaf surface to generate a decrease in the loss of mixture through dripping and to promote absorption by the plant by having more available products applied in the mixture.
Surfactants: Break the surface tension on the leaf so that the water droplets occupy a greater wetting surface and, in this way, increase the effectiveness of the treatment and reduce the chances of suffering phytotoxicity due to accumulation of active ingredient.
Anti-drift effect: avoid any type of drip loss in spraying and ensure compactness in the spray, regardless of whether or not the nozzles used are anti-drift.
Antifoams: avoid foam formation prior to incorporating the rest of the products to prevent foam from forming in the mixture.
Defoaming: eliminate the foam generated in the mixtures of certain formulations to homogenize them and avoid losses in the concentration of the active ingredients.
| CROPS | DOSE (L/Ha) |
|---|---|
| Application in all crops | Terrestrial Applications: Mix in doses of 0,30 - 0,50 |
| Aerial Applications: Mix in doses of 0,30 |
Sinergystik
SINERGYSTIK is a multifunction formulation based on Alkyl polyglycol ether whose physical- chemical properties improve the quality of the culture medium by eliminating the foam generated by some mixtures, cohesive action and homogenization of the mixtures, which facilitates handling and offers greater effectiveness in the fight against pests and crop diseases, with special characteristics that allow it to interact with the lipophilic characteristics of the leaf cuticle and the lipophilic or hydrophilic characteristics of the agrochemical in use, facilitating the reduction of the surface tension of the areas in contact (drop of the solution and plant tissue) improving the coverage of the sprayed area, facilitating the penetration and absorption of the product into the plant tissue.
The different functions of SINERGYSTIK aimed at facilitating work in the field and optimizing phytosanitary and plant nutrition treatments could be summarized as:
Wetting action: improves the adhesion of the mixture on the leaf surface to generate a decrease in the loss of mixture through dripping and to promote absorption by the plant by having more available products applied in the mixture.
Surfactants: Break the surface tension on the leaf so that the water droplets occupy a greater wetting surface and, in this way, increase the effectiveness of the treatment and reduce the chances of suffering phytotoxicity due to accumulation of active ingredient.
Anti-drift effect: avoid any type of drip loss in spraying and ensure compactness in the spray, regardless of whether or not the nozzles used are anti-drift.
Antifoams: avoid foam formation prior to incorporating the rest of the products to prevent foam from forming in the mixture.
Defoaming: eliminate the foam generated in the mixtures of certain formulations to homogenize them and avoid losses in the concentration of the active ingredients.
- ALKYL POLYGLYCOL ETHER 14.0 %
SINERGYSTIK can be applied at any time of crop development using aerial, tractor or back sprinkler equipment. For adequate dissolution of agrochemical products and/or foliar fertilizers, add the amount of agrochemicals and/or foliar fertilizers to the water and then add SINERGYSTIK.
Preparation of the mixture
Fill half of the tank with clean water and start stirring. Shake the container before use and add the required amount of product. Continue stirring during spraying.
Mixing order:
Water + SINERGYSTIK
Water + SINERGYSTIK + pesticide (when used in mixtures).
Adjust the pH.
A droplet size of 200 to 300 microns is the ideal size for treatments.
COMPATIBILITYAs a non-ionic substance, SINERGYSTIK is compatible with agrochemicals commonly used in agriculture.
PHYTOTOXICITYIt is not phytotoxic when used according to the recommendations and doses of SPACHEM S.L. In case of mixing, perform a small scale test to check compatibility and phytotoxicity.
REMARKS
The recommendations and information we provide are the result of extensive and rigorous studies and tests, however, numerous factors beyond our control may intervene in the use (preparation of mixtures, application, weather, etc.). The company guarantees the composition, formulation and content. The user will be liable for any damage caused ( lack of efficacy, general toxicity, residues, etc.) due to total or partial non-observance of the label instructions.
- High wetting power and is compatible with any mixture.
- It is a synthetic agricultural adjuvant developed to guarantee the desired effectiveness of the phytosanitary product.
- Ensures that the application drops do not remain suspended in villi and other projections on the leaf surface.
- Increases the effectiveness of applications in unfavorable weather conditions.
- Reduces the surface tension of the droplets, allowing better and uniform adhesion to the leaves.
- It has anti-evaporative characteristics, which increases the number of droplets per square centimeter.
- It is extremely adherent, ideal for spraying, preventing runoff.
- It induces direct stomatal infiltration of the application solution due to its effect on surface tension.
- Reduces drift in unfavorable conditions.
- Reduces foam.
- Increase the exposure of the biocide product on the target and consequently improve biological performance, especially in crops that are difficult to wet due to having smooth, hairy and/or waxy cuticles, or because they do not have trichomes that help trap liquids.
The icon represents products that possess surfactant properties, designed to improve the adhesion, wetting, and penetration of solutions applied to plant or soil surfaces.
The icon identifies products formulated to adjust and stabilize the pH of nutrient solutions or foliar applications.
The icon identifies products formulated with surfactants or wetting agents that reduce water surface tension, improving the coverage, adhesion, and penetration of solutions applied to plant surfaces.
The icon identifies products designed for direct application to leaves, where nutrients and biostimulants are rapidly absorbed through the stomatal and cuticular pathways.
The icon indicates products formulated with chelating or complexing agents that neutralize the cations responsible for water hardness.